Surfaces Clean Enough for Paint to Bond

Pressure Washing in Mint Hill for siding, decks, and fences that need mildew and loose debris removed before repainting

Homes built in Matthews and Davidson during the 1970s and 1980s often have vinyl or wood siding that has collected years of mildew, pollen and grime, and painting over those contaminants without washing the surface first guarantees adhesion failure within months. As a painting company, Concepcion Barajas Painting Co. approaches washing as a preparatory step for the next paint job, so surfaces are cleaned to the level required for proper bonding rather than simply rinsed for appearance. The owner has painted since 2006 and has run the company since 2011, treating surface cleaning as part of the painting process rather than a standalone cosmetic service.


The crew uses a pressure washer set to a pressure appropriate for the material, because excessive force can gouge wood siding, strip paint, and drive water under trim and flashing. Mildew and organic growth are treated with a cleaning solution before rinsing, loose debris is washed away, and the surface is allowed to dry completely before any primer or finish coat is applied. Landscaping and plantings near the foundation are covered to protect them from the cleaning solution.


Schedule a pre-paint surface cleaning to remove the buildup that prevents proper adhesion.

How Cleaning Affects Paint Adhesion

Pressure washing removes the layer of dirt, pollen, mildew and chalking paint that sits on top of siding and trim, exposing the sound substrate underneath so primer can bond directly to it. The pressure is adjusted based on the material: lower pressure for wood and painted surfaces, higher pressure for concrete and masonry. Corners, soffits and other recessed areas where mildew accumulates are treated and scrubbed before rinsing.


Once the washing is complete and the surface has dried, siding that previously looked gray or streaked returns to its original color, mildew stains disappear, and the texture of the material is visible again rather than buried under a film of grime. Paint applied to a properly cleaned surface bonds mechanically to the substrate and lasts longer than paint rolled over contaminated siding.


Washing is performed as a preparatory step before painting and is scheduled to allow the surface to dry fully, which typically requires one to two days depending on humidity and sun exposure.

What Property Owners Ask About the Work

Pressure washing raises practical questions about the process, materials, and timing. The answers below address the work itself and how it fits into the repainting sequence.

  • What pressure setting is used for washing wood siding?

    Wood siding is washed at a lower pressure, typically between 1,200 and 1,500 PSI, to remove dirt and mildew without damaging the grain or forcing water behind the boards.

  • How is mildew treated before rinsing?

    Mildew is treated with a cleaning solution designed to kill organic growth, allowed to sit for several minutes, then scrubbed lightly and rinsed thoroughly so the surface is free of both the mildew and the cleaning agent.

  • Why must the surface dry before painting?

    Moisture trapped under fresh paint causes adhesion failure, blistering and peeling, so the surface is left to dry completely, typically for 24 to 48 hours, before any primer or paint is applied.

  • How are plants and landscaping protected during washing?

    Plants near the foundation are covered with plastic sheeting, the cleaning solution is applied carefully, and the area is rinsed thoroughly to dilute any residue that reaches the soil.

  • What is the difference between washing for appearance and washing for paint prep in Mint Hill?

    Washing for paint prep involves treating mildew, removing all loose debris and chalking paint, and ensuring the surface is completely clean and dry, while cosmetic washing may leave contaminants that interfere with adhesion.

Concepcion Barajas Painting Co. also pressure washes homes in Matthews, Indian Trail, Charlotte, Huntersville and Cornelius. Call (704) 557-5072 to discuss surface cleaning before your next repainting project.